Tuesday, January 31, 2012

Samsung GT-S5620 MIC Convertion, PHILIPPINE Made

Unit:
samsung gt-s5620

Problem:
mic (hindi daw marinig ang boses niya)

Mga Kailangan:
-mic ng chinaphone (bago o luma,BASTA 2 LANG ANG PAA)
-5K resistor (bahala na kayo kung ilang watt,ginamit ko lang yung resistor ng 7210...gamit ka ng MULTI TESTER para malaman mo ang VALUE ng resistor! spoonfeeding na yan kapag binigay ko pa ang location ng pinagkunan ko)
-double sided tape (ito kahit wala na ito,gumamit lang ako para may kalidad ng gawa)


Screenshot:

kung mapapansin ninyo 4 na rin ang paa ng mic,katulad ng c3303k champ....pinagkaiba niya yung left side ay shorted o connected












right side po ng flex, e-series connection lang po ang resistor katulad ng nasa screenshot...
ihinang sa leftside ang negative line ng mic at sa upperside ng resistor ihinang ang positive line




with small diagram





hindi ko na sana isasama itong screenshot na ito pero di ko matiis
yan yung may-ari...naka smile na...ok na daw kasi


SAMSUNG GALAXY GIO S5660 unlock done

Samsung Galaxy Gio S5660 lock to network


tools-z3x&usb like 5310

seacrh ako lahat nang gamit nila rj45 c3303k cable

hmmm napaisip ako try ko nga usb ayun sapol walang ka hirap hirap!!



insert usb install driver

hit unlock



SAMSUNG c3303k. insert sim.. 'DONE' w/tricks

1.step... check ko ang mga linya. Gamit k ang tester. may putol tatlong linya..

2.step... search button. para makita ko kung saan ang connection..

ito po!










finish





C3303k SAMSUNG logo blinking DONE.

Good pm po mga bossing share ko lang dinala sa akin c3303k logo blinking lang
ito po ginawa ko mga boss

1st erase eep

Selected model: C3303
Selected com port: COM7
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 08
Sending loader2... OK
Erase - ok
Elapsed time: 94 second, sw ver: 3.5.0029
-------------------------------------------------------------------------------


2nd flash using firmware C3303KOWNJ4
here is the logs




lected model: C3303
Selected com port: COM7
Selected speed port: 921600
Press "volume up" + "lock" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> 0A33
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Sending part LCDACT:
Erasing... OK
Sending... OK
Sending part MAIN:
Erasing... OK
Sending... OK
Sending part DSP:
Erasing... OK
Sending... OK
Sending part ROOT:
Erasing... OK
Sending... OK
Sending boot sector:
Erasing... OK
Sending... OK
Sending TFS... OK
Sending CSC... OK
Download - ok
Elapsed time: 869 second, sw ver: 3.5.0029

SAMSUNG C3303k no light IN LCD....Done!






1st move...clean the board by magic thinner..still the same!
2nd move... replace lcd..still the same!
kaya hanap na ako ng solution dito, papalitan ang coil...




may mga solution na nakapost dito pero wla screen shot kung saan nakuha ang pyesa na ipinalit, wla din ako same board para makunan ng coil na pamalit kaya isip mode muna...may mga china phone akong board na stock pero wla kaparehas na coil...dahil sa wala ako maipalit na coil, eto sinubukan ko, coil ng 1110i...




then jumper ko nalang kasi malaki sya compare sa orig na coil...




pagkatapos eto na assemble ko na, sasabit ang cover kaya eto medyo inangat ko..




pagkatapos eto na finish product...



SAMSUNG t379 OPENLINE done via pegasus box.

tools:
:pegasus box
:micro uart cable


:Open pegasus
:Select model
:Click connect and wait.........
:put un-accepted sim card it will ask for NCK
:Then enter NCK









Nokia Asha 303 lock code Done!


PROBLEM:
Lock code

PROCEDURE:
1- Download firmware here
2- install firmware
3- open Mxkey select model or RM-763 then flash
4- after flash goto service action then click reset all
5- Done at kunin ang bayad hehehe.

SCREENSHOT