Thursday, May 31, 2012

w610 SIGNAL PROBLEM (TIP'S INSIDE)

PROBLEM:

W610(i) Emergency call ONLY (always DROP SIGNAL)


Quote:
hindi lahat ng unit ng SE Phones na walang signal nakukuha sa flashing o updating user our software or free software. like this one, halos lahat ng firmware and CID ginawa ko na pero still, same problem parin. for sure ngayon lahat ng w610 makukuha nyo na in this solution if hindi makuha sa flashing.:sss
FOLLOW THIS SCREENSHOT!




FINISH WORK! (OK NA)


Monday, May 28, 2012

LG KP500 Logo only done, flashing via z3x

LG KP500 Logo Only done sa flashing via z3x ( for reference )


Tools:

Z3X LG Activated

KU311 / KE500 cable


Procedure:

Open LG Infineon SGOLD3 Tool

Select Model

Click UART

Connect phone to usb


Click Connect

Load Flash File

Click Write

wait till done flashing (121 minutes 30 seconds)


Screenshot:



BEFORE





Flashing









FINISH PRODUCT



Nokia 1616 no light done by tested jumper

ito po unit parang no power...




ito po ginawa ko....








done na po.....



iPad2 (GSM) Disable Done

Problem:
-iPad is disable


Solution:

-Just retore to 5.1.1 and Jailbreak with Absinthe












Friday, May 25, 2012

Samsung i5503 Too Many Pattern Attempt Done

i5503 PROBLEM TOO MANY PATTERN HARD RESET AYAW PUMASOK KAYA FLASH KO NA LANG SA ODIN




PROCEDURE:
1. Extract Odin v4.28 and Ops File.zip I5500XXXX.rar
2. Open Odin v4.28,
- Select OPS tab: EUROPA_I5508_v1.0.ops
- Select BOOT tab: I5500XXXXX_BOOTLOADER.tar.md5
- Select PHONE tab: I5500XXXXX_amss_phone_CL462398.tar.md5
- Select PDA tab: I5500XXXXX_PDA_CL500331.tar.md5
- Select CSC tab: I5500XXXXX_CSC_SER_CL498242.tar.md5
- Make sure Auto Reboot & Protect OPS selected in Option tab
*If you have 1 file is this the PDA.tar
You can flash only the pda file.
- Make sure One Package selected in Option tab
3. Turn off phone, remove battery for 5second, put it back
4. Hold "Volume Down, Center button & Power button" in the same time to enter Download Mode
5. Connect to PC with USB cable
6. When the data line and the phone connection is successful, com port shows yellow in Odin
7. Press Start on Odin
8. Waiting & Pray!
9. PASS, its done!

*Hard reset after flashing *2767*3855#
*Check ur Phone Info *#*#1234#*#*



WAIT UNTIL REBOOT AND SMILE

nokia x1-01 no signal sim2 to done atf nitro

ito ang unit








history:


Quote:
sabi ng costomer, bigla lang daw hindi maka recieved ng message ang sim2
procedure:

Quote:
ito first step ginawa ko try ko mona removed sim1 at insert
ko sim2 meron po sya signal kaya na isip program ko mona


ito po tested flash gamit ko

X1 flash file click here download nyo lang sa mga wala pa..
logs here

Quote:
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...

************************************************** ****
TIME STARTS HERE
************************************************** ****


Sending PBL 19456 bytes...
PBL Successfully Sent...

Sending SBL 65024 bytes...
SBL Successfully Sent...

Flash Chip Manufacturer: Samsung Electronics Corp.
Flash Chip Type: K8S6415ETC 64 Mbit (4Mb x 16) NOR
Extended Information: Multiple Bank / Burst / 1.8v

Processing Image File: F:\files\Nokia flash file\X1-01_rm-713_v5.44\rm713_005.440

FIRMWARE Image Found...
Number of Sections: 03
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01 of 03
FIRMWARE Erase Block: 0x00000000~0x0001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 24576 bytes
Data Checksum: 55FD
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 02 of 03
FIRMWARE Erase Block: 0x00800000~0x00BFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 4128768 bytes
Data Checksum: 2909
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 03 of 03
FIRMWARE Erase Block: 0x00C5D000~0x00E5FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1697536 bytes
Data Checksum: 7639
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: F:\files\Nokia flash file\X1-01_rm-713_v5.44\rm713_005.44ei

PPM Image Found...
Number of Sections: 01
PPM Certificate Block Sent Successfully...
Processing Section 01 of 01
PPM Erase Block: 0x00100000~0x0064B0FE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 5550336 bytes
Data Checksum: 326C
Uploading Data Blocks to phone...
PPM Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: F:\files\Nokia flash file\X1-01_rm-713_v5.44\rm7130_nai05.44ei

CONTENT Image Found...
Number of Sections: 01
CONTENT Certificate Block Sent Successfully...
Processing Section 01 of 01
CONTENT Erase Block: 0x00E60000~0x00F15BFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 744448 bytes
Data Checksum: 0882
Uploading Data Blocks to phone...
CONTENT Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Exit Flash Mode Done...
Time Elapse : 00:04:35

************************************************** ****
You must Factory Reset the phone to enable the
ringtones and other customized settings to work
************************************************** ****


Waiting For Phone to go Online...

5, 4, 3, 2, 1...
MCU: V 05.44 21-09-11 RM-713 (c) Nokia
IMEI: 358291041522726
Product Serial Number: 2AD26CFAH
Product Code : 059D8Q2
Module Code : 0204727
Basic Production Code: 059K2G8
PPM SW Version : V 05.44 21-09-11 RM-713 (c) Nokia EI
ADSP Version : p V 05.44\n21-09-11\nRM-713\n(c) NMP\nei
MCU SW Version : V 05.44 21-09-11 RM-713 (c) Nokia
HW Version : 1000
UEM Version : 1328
UPP Version : 8850
LCD Version : TPO:BARACOAv82 HX5081
********** SIMLOCK INFO **********
CONFIG_DATA : 0010100000000000
PROFILE_BITS : 0000000000030002
ASIC : 11
PROVIDER : Default Test Operator

Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST : PASSED


FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK
screen shot:



finish product:




done:

Nokia 1112 no signal Fix by hardware

Nokia 1112 no signal galing kabilang shop, done!!!

sabi na sa kabila di na raw kaya inayawan na so dinala nya dito

action taken: baklas ko ang unit nakita ko may repair na po sya sa signal parts

kung mapansin nyo dito sa may loob ng mark red may repair napo mga parts





Tirahin ko na sana ang hardware nya, napa isip aku nahardware na dun sa kabilang pro walang nagyari, so ginawa ko software muna ginawa ko

flash ko sa H.T.I. tapos write full pm ang ginawa ko

tapos mag flash at write pm, at unlock tapos full factory..

tapos seft test ko na ang unit.

ito po ang diagnose nya.




naisip ko naku may problema nga hardware nito

so testing ko muna ang unit bago ko tirahin hardware

ito po result



aba himala nag ok ang unit...
testing ko ng ilang oras ok naman ang signal di naman nawala



Thanks GOD...

paxenxa napo di ko nakuhanan ng picture ang unit bago gawin at saka yung sa pag flash ko kasi kala ko di na maayus

Take note:
Quote:
Sana bago po natin gawin ang mga ganitong sira na walang signal ay software muna natin wag muna natin e hardware para ng sa ganun kung software lang ang sira di lumaki ang sira...

Nokia 1661-2b unlock and convert





UNIT : NOKIA 1661
PROBLEM : Lock to other network (01 start ng imei)
SOLUTION : Reprogeram, write pm file, unlock, and convert

TOOLS :
- ATF Box
- 3 in 1 usb cable



PROCEDURE


- Flash unit with 1661 flash file rh-122
- Write pm file rh-122
- Unlock
- And do hardware modification

ETO PO UNG FLASHFILE AT PM FILE

SCREENSHOT w/ guide

FLASHING




WRITING PM




UNLOCKING




And do hardware modification




FINISH PRODUCT

samsung galaxy ace hang and error in flashing done

i have here samsung galaxy ace s5830i hang in startup

solution flash phone
1. put it in download mode by holding on volume + and - then power on at the same time when screen appears release then select up.
2. connect usb cable
3. put desired files like this picture below as shown





4. click flash

after click start i got error in the last which is boot image error so i try to change a file of boot image maybe its corrupted. but i fails again. so this is what i do

follow instructions from 1 and 2 in method 3 put desired files w/o boot image then click flash

see the picture here





phone flashing success done