Monday, September 30, 2013

LG-P350 SIM network unlock PIN problem successfully unlocked


LG-P350 unlocked done in (2mins)

How to enter the Unlock Code?

1. Power on your phone with the original SIM card
2. Enter 2945#*350#
3. A menu will pop up, select Unlock USIM then Network





4. Enter nck code..

done....



Samsung Galaxy S Duos S7562 Unlock done!

Tools:

Z3x box
Sam 3303k cable

Procedure:

1. Open z3x tool
2. Select model
3. Read info
4. Direct unlock
5. Done!


Screenshots:






note:
lahat ng file ng phone mabubura/automatic reset in direct unlock

Samsung Galaxy Grand Duos I9082 JellyBean 4.1.2 unlock done

Samsung Galaxy Grand Duos 4.1.2 Unlock Done by Z3x 15.4
PROCEDURE:

ROOT FIRST


Pre-requisites
1) Install USB Driver for Samsung Galaxy Grand Duos to connect the Android device with computer.
2) Enable USB Debugging Mode on the phone to connect it with the computer and use Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and ensure the USB Debugging Mode is turned on.]  
3) As the tutorial might wipe all data of the phone, create a back-up. If the device is having any custom recoveries such as CWM/TWRP already installed then backup data using the recovery.      
4) The Galaxy Grand Duos should have above 80 per cent of battery charge.  
5) Rooting the phone will void manufacturer's warranty. However, users can reclaim the warranty back by unrooting the device later on.
6) The CWM touch recovery file and the SuperSU file work only with Samsung Galaxy Grand Duos GT-I9082. Flashing this on incorrect variant might brick the device. Therefore, verify the model number of Galaxy device by navigating to Settings>> About Phone>> Model number
Files required to download
Download Odin3-V3.04.zip
Download ClockworkMod Touch Recovery file [File name: CWM_gt_i9802.tar.md5]
Download the CWM flashable SuperUser file for root access to the computer. Then copy the downloaded zip file to either internal or external memory of the phone. But do not extract the zip  
[File name: UPDATE-SuperSU-V1.25.zip]  


HERES THE PIC





FINISH PRODUCT:

Samsung Galaxy Note I N7000 imei problem solution repair imei Done.


model : N7000 (note 1)
problem : imei issue (004999XXXXXX)
action applied : Repair imei via z3x box


screenshots:









Auto-Rooting....


















Actually ang unang problema nito deadboot.
JTAG muna nung kasama ko via medusa tapos flash ko via Odin...





then after ma flash naging 0049 na yung imei

Cherry Mobile T35 Screen Locked Problem Solution by Flashing Done


Tools;
Volcano box

Read ko pero Mali binigay ni volcano, kaya back up first then Phone reset and Format Dead na tuloy

Hanap ako sulotion but same din pala kami ng iba so,

eto ginawa ko





tested firmware eto oh HERE
NOTE: use 1.9.7

Samsung Galaxy S4 i9500 wifi problem done.


galaxy s4 i9500 ayaw mag open yong wifi kahit na software na oden, spt, staka z3x.. kaya decide nako i hardware..





kaya ito kinuha ko yong wifi ic sa isang board na dead..


Friday, September 27, 2013

Samsung Galaxy Note I N7000 Not charging solution




completo naman po ung linya na usb nya wulang putol or lumiwag
tester ko okie po xa tapos tinanong ko sa cos2mer bk8 nag kaganito





sabinya bigla na lang daw nag kaganyan bka kakagamit





ung pag bukas ko nakita ko ayon ung tatlong salarin sunog hanap po ako
nang kapalit nakakita po ako sa s5360 na bord ayon nadali sapol po









yan po ang resulta nag chargs na po 2wang 2wa si momy





ay sana po maka2long sainyo



Android TV WIFI IPAD MTK remove password success by Volcano Box



ito ang procedure sundan lang pag may maka incounter sa iyo jan



1.





2.





3.





4.





5.





6.





pwidi rin gamitan ng USB PORT P-12C pwidi rin RX TX

dalawa kasi ang USB PIN sa bandang puwitan at sa gilid

ang epektibo ung sa bandang gilid ito


Samsung S8003 HANG in logo done via multiloader solution




GT-S8003 HANG done via odin

S8003_JVIF1
usb 5310
multiloader 5.56
















Samsung T359 T-mobile incorrect sim problem. unlock solution


UNIT: Samsung T359 T-mobile





PROBLEM: Need to Unlock

Tools

1. micro usb chords
2. Z3X Box
3. Driver

DONLOAD DRIVER CLICKME

Procedure


used 5310 mini usb
1. Power on phone
2. Type *#197328640# -> common -> usb config -> Qualcomm mode
3. Connect USB cable, setup drivers
4. Choise qualcomm diagnostic port in port settings
5. Choise unlock method - Read codes or Direct
6. Click Unlock SP button and wait till finish..


Unlocking





DONE









Test


Cherry Mobile D15 TV no power solution via gpg dragon v3.30


open gpg dragon...tick check box..tick mtk...select com...read info...hit start...tapos read flash
para may back up..hit start....then tick write ime..hit start...kailangan nakapress ka parin sa power o ng phone para madaling lumabas yong write imei....then put imei...tapos tick write imei ok na ang phone....









ito po phone dati...







F909 MODEL CUBUT Too Many Pattern Attempts Solution DONE


V 2.2.7 Volcano

Updated: 2013-08-22
Connecting...
Connection successful,connected state!
Version: V3.8
SN:253-xxxxxxx
Port:COM36
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM15 COM16 COM36
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 5
Analyzing Rx and Tx...
User stop
Pinouts are not fonud!
Available Ports:COM15 COM16 COM36
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 0.95 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
UsbVcc(VCC) = 1 10, BOOT(Pull Down) = 4
Setting...
Find USB device:SCI USB2Serial (COM39), (VID_1782&PID_4D00)
Pinouts setting complete!


Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC8810/6820 [88100040]
Flash ID: 002C00BC90555600
Flash Type:[Micron] MT29C4G48MAZAPAKD
FLASH LEN:0x20000000
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 230m(system),150m(userdata),70m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic)
Analysis flash internal data successfully.
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 0.94 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
UsbVcc(VCC) = 1 10, BOOT(Pull Down) = 4
Setting...
Find USB device:SCI USB2Serial (COM39), (VID_1782&PID_4D00)
Pinouts setting complete!



Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 0.94 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
UsbVcc(VCC) = 1 10, BOOT(Pull Down) = 4
Setting...
Find USB device:SCI USB2Serial (COM39), (VID_1782&PID_4D00)
Pinouts setting complete!


.


Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 0.94 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
UsbVcc(VCC) = 1 10, BOOT(Pull Down) = 4
Setting...
Find USB device:SCI USB2Serial (COM39), (VID_1782&PID_4D00)
Pinouts setting complete!



Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 1.00 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
UsbVcc(VCC) = 1 10, BOOT(Pull Down) = 4
Setting...
Find USB device:SCI USB2Serial (COM39), (VID_1782&PID_4D00)
Pinouts setting complete!

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 230m(system),150m(userdata),70m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic)
Analysis flash internal data successfully.
>>Set to Factory successfully.

ALCATEL ONE TOUCH 918n Enter Sim Lock Solut

MODEL

ALCATEL ONE TOUCH 918n



STATUS

LOCK SUN PROVIDER










TOOL'S

NCK BOX

MICRO USB CABLE



PROCEDURES





Samsung SC-05D Enter Network Lock Control Key Solution by z3x box


Procedure:

Micro-uart cable:
1. Phone must be powered on.
2. Connect the phone to UART port.
3. Choose correct COM port in port settings.
4. Press "Unlock" button.
Micro-USB cable:
1. Phone must be powered on.
2. Type *#7284# and choose Modem for both options.
3. Type *#9090# and choose USB Diag.
4. Reboot phone.
5. Connect USB cable, install drivers.
6. Select diagnostic port in port settings.
7. Press "Unlock" button